[. . . ] When adding foods to the freezer the temperature of the appliance may be higher than that of the thermostat dial. In the event of this occurring reduce the thermostat dial by 1 or 2 numbers to stop the fridge from becoming excessively cold. [. . . ] Once the freezing process is completed, return the thermostat dial to the usual value (between 2 - 3). For better air circulation, leave some room in between the foods and avoid blocking the cooling air outlets. A small amount of frost or drops of water on the back of the fridge compartment when the fridge is working is normal. Also make sure foods do NOT touch the back or sides of the fridge compartment. A fridge freezer with FROST FREE technology does not require the freezer section to be defrosted because this product is equipped with an automatic system which prevents ice from forming. 4B) FRIDGES WITH CONTROL PANEL IN FULL VIEW: In models where the control panel is visible from the front with the door closed, remove the middle hinge, remove the top door, unscrew the pin of the top right-hand side hinge and remount it on the left hand-side hinge. 5) Where a door stop is used , remove the right-hand side one by loosening the screw. Take the left-hand side door stop from the accessories kit and secure it with the screw you had previously removed. 6) Remount the doors in reverse order, remembering to remount the spacing washers placed between the door and the hinge. 7) If the vertical handles are present, move them from the left to the right side, by loosening the corresponding screws. [. . . ] 6) Remount the doors in reverse order, remembering to remount the spacing washers placed between the door and the hinge. 7) If the vertical handles are present, move them from the left to the right side, by loosening the corresponding screws. [. . . ]